Bridle Joint
Bridle joints are similar to tenon and mortise joints but have an increased bearing surface. They are commonly used in roof construction, especially for making beams.
Making Bridle Joints
Procedure:
- Prepare the piece of wood to the required length, width, and thickness.
- Set out and mark the position to be cut off.
- Saw down the grain, working on the waste side of each piece. Cut the tenon shoulder with a fine saw, taking care not to cut into the neck and weaken the joint.
- Chop out the waste wood in the socket or notch with a coping saw or chisel.
- Assemble and trim off the excess to make the joint flush.
Author
Disclaimer
This content has been uploaded by a guest (third party). Please note that their views and opinions expressed herein are their own and do not necessarily reflect the views of the hosting platform or its administrators.